NOV TDS-11SAE Upgrade Specifications & Spare Parts

The NOV TDS-11SAE upgrade of a TDS-11SA: published reference values and the conversion records needed to identify replacement parts.

The NOV TDS-11SAE is a documented upgrade of a customer-owned TDS-11SA, combining two 600 hp induction motors with revised gearbox internals. For replacement parts, identify the installed conversion as well as the original machine: “TDS-11SA with larger motors” is not enough information to establish the upgrade configuration.

Request TDS-11SAE parts identification

TDS-11SAE reference specifications

The following values are from NOV’s TDS-11SAE upgrade flyer, ©2017, document 101215497 Rev 02 / 2563_ENG_v01, page 2. The continuous-torque speed is explicitly identified in the Top Drive Technologies brochure, ©2024, page 11. These are published reference values; the serial-specific equipment records govern selection.

Parameter Published reference
Drilling motors 2 × 600 hp AC induction
Hoisting / rotating rating 500 short tons
Continuous torque 58,800 ft-lb at 110 rpm
Maximum speed 228 rpm
Gear ratio 10.56:1
Breakout / makeup torque 75,000 / 62,500 ft-lb
Static lock brake 39,000 ft-lb
Working height 19 ft 4 in; 21 ft 8 in with 120 in bail
Reference weight 35,000 lb
Watercourse / washpipe packing 3 in / 7,500 psi
Pipe handler / IBOP rating PH-75 / 15,000 psi
Cooling / hydraulic power Local blower / onboard hydraulic power

A published maximum does not define every operating condition or installed option. Do not combine ratings from different TDS-11 variants into a proposed machine specification.

Why the gearbox matters when ordering parts

NOV’s 2024 brochure describes changes to the compound and pinion gears, bull-gear mounting, bearings, bearing housings and gearbox cover for the SAE conversion. This makes the upgrade records especially important for transmission enquiries. A base-model bearing or housing reference should not be treated as an interchangeable SAE item without the applicable drawing and revision.

For a gearbox enquiry, send the conversion job reference, installed assembly number and drawing item position. If only the original TDS-11SA manual is available, identify that limitation in the request. A photograph or a dimension can help identification, but neither replaces confirmation against the correct assembly record.

Model-specific component enquiry map

Requirement Evidence to include with your RFQ
Upgraded gearbox gears, bearings, housings or cover SAE conversion records, gearbox assembly drawing/revision, item position and existing part markings
600 hp drilling motor or associated cooling item Both motor nameplates, required motor position, installed blower reference and electrical drawings
Top-drive VFD, drive controls or power service loop Installed drive/inverter model, electrical configuration, cable and connector references, and conversion documentation; suitability requires configuration review
Washpipe or packing Installed washpipe assembly, pressure requirement and seal arrangement; distinguish a packing set from a complete assembly
PH-75, IBOP or actuator Handler/valve/actuator assembly reference, serial number, drawing revision and exact component required
Onboard hydraulic-power component HPU and component tags, circuit/drawing reference and whether the request is for a pump, valve, seal kit or complete unit

This table is an identification and enquiry map, not a complete spare-parts list or a declaration of stock. The motor, transmission, cooling, washpipe, handler and hydraulic groups are tied to NOV’s published SAE configuration. Electrical controls and service loops must be checked against the actual rig installation; no universal VFD or cable part number is asserted here.

Prepare an assembly-specific TDS-11SAE RFQ

Separate the base machine, SAE conversion and other TDS-11 models

Keep the equipment designation exactly as recorded. Use the TDS-11SA page for the base-model reference and retain the conversion records with an SAE enquiry. The TDS-11HD, TDS-11SH and TDS-11-1400 upgrade have separate coverage. Similar ratings or shared family names do not establish part interchangeability.

Frequently asked questions

Does a pair of 600 hp motors prove that the machine is a TDS-11SAE?

No. NOV describes a conversion involving motors and gearbox internals. Request the completed upgrade documentation and installed assembly references before choosing replacement parts. This page does not validate an undocumented conversion.

Can I send an enquiry without an OEM part number?

Yes. Include the exact nameplate designation, equipment serial number, assembly location, photographs, quantity and available drawings. Tell us which records are missing so the identification gap is visible before a quotation is prepared.

Are all TDS-11SAE part numbers verified here?

No. A serial-specific OEM bill of materials and conversion parts list have not been verified for this page. Exact gear, bearing, seal, motor and electrical part numbers remain a verification backlog. No complete BOM or universal compatibility is claimed.

How should supply origin be specified?

State whether OEM-origin material is required or whether an independently manufactured replacement may be considered. Any proposed alternative needs its own identification, compatibility basis and documentation. Mentioning NOV products here does not imply OEM authorisation or an OEM-approved repair facility.

Send a requirement that can be checked

Include model and serial number, conversion reference, assembly and drawing revision, part number or item position, quantity, condition/origin requirements and delivery destination. Ask the quotation to identify inclusions, exclusions, documentation and any compatibility questions still open.

Use the enquiry form to describe the requirement. If drawings or photographs are needed, the sales team will reply to your email so you can send them.

Prepare your TDS-11SAE enquiry Email the team · Call +1 603 795 0617

Manufacturer sources and verification status

Sources reviewed 18 November 2026. These brochures support model identification and reference specifications, not a complete historical model list or serial-specific parts applicability. Current configuration, BOM, conversion scope and electrical integration require equipment-level verification.

Browse the manufacturer and model directory · NOV / Varco top drives · Top drive components