NOV TDS-11SH Specifications & Spare Parts

Reference figures for the NOV TDS-11SH and how to identify the motor arrangement and document revision for a parts enquiry.

The TDS-11SH is part of NOV’s 500-ton top drive range. For replacement parts, identify the motor arrangement and document revision before comparing it with TDS-11SA or TDS-11HD equipment.

TDS-11SH specifications: document differences

Parameter NOV product directory NOV TDS-11SH flyer
Hoisting capacity 500 short tons 500 short tons
Power 2 × 600 hp 2 × 550 hp permanent-magnet AC motors
Continuous torque 54,600 ft-lb 51,000 ft-lb at 125 rpm

These figures differ between published NOV references. They are not combined into a single machine specification. Use the installed motor nameplates, serial number and equipment-specific datasheet to establish the correct configuration.

Components identified in the NOV flyer

The illustrated arrangement includes the transmission, washpipe, PH-75 pipe handler, upper remote and lower manual IBOP stack, motor cooling fans, lubrication oil cooler, service loops and elevator links. The flyer also gives a 19.5 ft stack-up height; verify the actual installation and bail configuration before dimensional selection.

Additional specifications from the 2012 model flyer

These values belong to NOV flyer D392004689-MKT-001 Rev. 02, ©2012, page 2, for its illustrated permanent-magnet configuration. They must not be transferred automatically to a machine matching the current directory’s different power rating.

Parameter Flyer reference
Reference weight 28,000 lb (12,700 kg)
Transmission ratio 10.6:1
Maximum rotational speed 228 rpm
Breakout / makeup torque 75,000 / 62,500 ft-lb
Static lock brake 50,000 ft-lb
Watercourse / washpipe packing 3 in / 7,500 psi
IBOP pressure rating 15,000 psi
Cooling / hydraulic power Local blower / onboard

Use these references to frame an enquiry, not to set operating limits. Confirm the installed assembly and applicable equipment documentation before selection or operation.

Request TDS-11SH configuration and parts identification

TDS-11SH spare-parts identification

Requirement Send with your enquiry
Motor and cooling parts Motor type/nameplate, installed power and fan/blower assembly reference
Transmission, bearings and seals Gearbox serial, assembly drawing revision and component item position
Washpipe and fluid-path parts Installed washpipe assembly, bore, pressure requirement and packing reference
IBOP and actuator components Valve/actuator identifiers, connection and drawing position
PH-75 and link-tilt components Pipe-handler configuration, cylinder and torque-arrestor references

This component map is not a complete verified bill of materials. Part numbers, interchangeability and availability require equipment-specific verification. Do not order a TDS-11SA or TDS-11HD component for an SH unit based only on family resemblance.

Request TDS-11SH parts or equipment

Build an assembly-specific TDS-11SH enquiry

Start with the component you need rather than a general request for “top drive spares.” Keep one line per item and distinguish a complete assembly from an individual replacement or service kit. If you have several machines, identify the serial number for each line; do not assume that an item checked for one unit applies to the others.

Motor, cooling and electrical requirements

For a motor or cooling-fan enquiry, attach legible photographs of the installed component nameplate and its location. State whether the requirement is for the motor, fan, mounting component or complete assembly. Record the actual motor technology and rating instead of selecting them from a generic web specification.

For a top-drive VFD, drive-control or service-loop requirement, include the installed drive and component tags, electrical drawings and cable/connector references. These are installation-specific identification requests: this page does not establish a universal replacement inverter, software version or connector for every TDS-11SH.

Fluid path, handler and transmission requirements

Separate a washpipe packing request from an IBOP valve or actuator request. For each, provide the assembly reference and drawing item position, quantity and photographs. Where dimensions are available, identify what was measured; a dimension by itself does not establish the correct material, pressure rating or compatibility.

For PH-75 or gearbox items, send the installed assembly drawing and revision with the requested item marked. Include modification or overhaul records if available. Ask the quotation to identify which assembly the proposed item belongs to and to state any unresolved identification question before the order is placed.

Prepare an assembly-specific TDS-11SH RFQ

TDS-11SH parts questions

Which published power and torque rating should I use?

Use the installed equipment records to establish the configuration. The two references compared above do not prove when or why the ratings changed, nor do they establish that one rating can be substituted for the other. Send the serial number, motor nameplates and equipment datasheet with your requirement.

Can TDS-11SA, TDS-11SH and TDS-11HD parts be substituted?

No interchangeability is established here. Identify the exact model and assembly revision. The TDS-11SAE upgrade is also covered separately; a shared TDS-11 family name is not a parts cross-reference.

What if the part number is missing?

Send the machine serial number, marked drawing or clear component photographs and describe its location. Identify whether an individual item, kit or assembly is wanted. Record missing documentation openly so identification can be completed before a match is proposed.

Are these all the available spare parts?

No. A serial-specific OEM bill of materials and illustrated parts list have not been verified for this page. Exact motor, bearing, seal, valve and electrical part-number applicability remains a verification backlog. This guide does not establish inventory, availability or a complete parts list.

Can I attach drawings and specify OEM-origin material?

Yes. State whether OEM-origin material is required or an independently manufactured replacement may be considered. Any proposed alternative needs a separate compatibility basis and supply-origin statement. Use the enquiry form; if drawings are needed, the sales team will reply to your email so you can send them.

Prepare a TDS-11SH parts enquiry

Manufacturer references

References rechecked 19 November 2026. The online directory is undated; the flyer revision is identified above. TDS-11SA · TDS-11HD · All manufacturers and models