Fundamentals
What Is a Top Drive System?
A top drive is a mechanical device installed in the derrick or mast of a drilling rig. It provides clockwise torque directly to the drill string, replacing the traditional combination of rotary table, kelly and kelly bushing on the rig floor.
Checklist
Evaluation Checklist
Key items to verify when assessing a used or refurbished top drive
How a Top Drive Rig Works
In a top drive rig, the system is suspended below the travelling block and moves vertically up and down the derrick along guide rails.
- The top drive is suspended below the travelling block
- It moves vertically up and down the derrick along guide rails
- It rotates the drill string while drilling and during connections
- Drilling fluid is pumped through the top drive, down the pipe, and back up the annulus
Key Specifications
Typical hoisting capacity 250 – 1,500+ tons
Continuous Torque 25,000 – 105,000 ft-lb
Power Rating 450 – 2,700 hp
Max Speed Up to 250 rpm
Working Pressure Up to 7,500 psi
Components
Key Components of a Top Drive System
Most systems – regardless of manufacturer – include these essential components
Drilling Motor(s)
Electric AC induction motors or hydraulic motors that provide rotational power to the drill string.
Gearbox or Direct Drive
Converts motor speed to the required torque/RPM at the quill. Some designs use direct AC motor drive with no gearbox.
Quill / Mainshaft
The rotating shaft that connects to the drill string, often includes an internal washwipe for mud circulation.
Bearings & Housing
Support the rotating shaft and transmit loads to the guide structure for stable operation.
Pipe Handling System
Link tilt, elevators, bails and in some cases an integrated pipe handler for making up / breaking out connections.
IBOPs (Internal Blowout Preventers)
Upper and lower IBOP valves controlled from the driller's panel to close off the drill string in case of kicks.
Hydraulic Power Unit (HPU)
Supplies hydraulic power to actuate IBOPs, link tilt, pipe handler and other auxiliary functions.
Control System & VFDs
Benefits
Advantages over Rotary Table Rigs
Compared to a conventional rotary-table / kelly system, top drives offer significant operational improvements that have made them the industry standard.
Fewer connections, reducing non-productive time and risk of stuck pipe
Improved safety by minimizing manual pipe handling at the drill floor
Better well control, as circulation can be maintained longer during connections
Improved ability to back-ream, ream under weight and circulate while moving
Need Help Evaluating a Unit?
circulate while moving Because of these benefits, top drives are now standard on most new land rigs, jackups and offshore units.
